Re: [microsound] Re: no-input mixing board

[mik <prims@xxxxxx>]

i used to do something similar, but in a much simpler way. i connected a tape deck to itself with an equalizer in between. it was the time of the first sähkö releases (phi, panasonic,...) and they sounded alot like what i did or what i got out of my setup. still have it somewhere on k7.

m

a certain <wsoderberg@xxxxxxxxxxx> wrote:
> dunno if this counts, but at the vintage 8o's public access studio that i
> work at, i use the output of a hi8mm videotape recorder being fed the
> program output of the mixer then connected to 4 separate inputs back on the
> mixer... industrial hi8mm decks using both pcm & afm audio, that gives me 4
> channels of (no input?) feedback and 2 gain controls on each channel...
> sounds like a moog as ya work the eq & pan controls... am i wrong (quite
> possible) or isnt that what an analog synth uses, feedback circuits with
> various controlling potentiometers in the signal chain?
>
> ~will "not self-promoting for once" s.
>



--


--------___________________________


hear me here: http://www.mprims.tk

---------------------------------------------------------------------
To unsubscribe, e-mail: microsound-unsubscribe@xxxxxxxxxxxxx
For additional commands, e-mail: microsound-help@xxxxxxxxxxxxx
website: http://www.microsound.org